As an Amazon Associate I earn from qualifying purchases.1. MFMYUANHAN
Red 68 x 53 x 18 mm Engraver CNC Shield Board + 4Pcs A4988 Stepper Motor Driver For Arduino Engraver Integrated Circuits
MFMYUANHAN - Supply voltage:DC 12~36 V. Dissipation Power:other. Is_customized:Yes. Operating Temperature:other. Type:logic ICs.
2. Arduino
Arduino Motor Shield Rev3
Arduino - The shield is tinkerkit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board. Operating voltage: 5V to 12V. You can also measure the current absorption of each motor, among other features.
The arduino motor shield is based on the l298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two dc motors with your Arduino board, controlling the speed and direction of each one independently.
Brand | Arduino |
Manufacturer | Arduino |
Height | 3.5 cm (1.38 Inches) |
Length | 8.6 cm (3.39 Inches) |
Weight | 45 |
Width | 6 cm (2.36 Inches) |
Part Number | ARDUINO |
Model | A000079 |
3. Doradus
Doradus Semiconductor BTS7960B 43A H-Bridge Motor Driver Module For Arduino
Doradus - Gps accessories. H bridge motor Driver Module. Package contains one item. Please allow 7-23 working days for delivery. Semiconductor sheet7960b 43a.
4. Youree
R3 Motor Driver Module Expansion Board Blue L298P Shield H-Bridge 2A for Arduino UNO 2560 Driver Board
Youree - You can also measure the motor current absorption of each motor, among other features. The r3 motor driver module is based on the L298, solenoids, which is a dual full-bridge driver designed to drive inductive loads such as relays, DC and stepping motors.
R3 driver board lets you drive two DC motors with your board, controlling the speed and direction of each one independently. Max current 2a per channel or 4A max with external power supply. Motor drive voltage: external input 3-35V; internal input: 6-12V.
Brand | Youree |
Manufacturer | Youree |
Height | 2 cm (0.79 Inches) |
Length | 7 cm (2.76 Inches) |
Weight | 0.03 kg (0.06 Pounds) |
Width | 5 cm (1.97 Inches) |
Part Number | H0505SV-030 |
5. MFMYUANHAN
1PC PCA9685 16一Channel 12一bit PWM Servo Motor Driver I2C Module For Arduino Module Board New Wholesale
MFMYUANHAN - Adjustable frequency PWM up to about 1. 6 khz. 12一bit resolution for each output 一 for servos, that means about 4us resolution at 60Hz update rate. Configurable push一pull or open一drain output. Output enable pin to quickly disable all the outputs.
6. Demarkt
Demarkt L298N Dual H Bridge DC Stepper Motor Driver Stepper Motor Controller Module for Arduino
Demarkt - Dual-channel H-bridge driver working mode creates higher efficiency. Peak current up to 3a, continuous current 2A and 25W rated power. Products include: 1x l298n Double H-Bridge, Stepper Motor Driver Module.
With large filter capacitor, this module can follow current to protect diodes and improve reliability. Built-in 78m05, get power of drive power, but if drive power exceeds 12V, please use the external 5V power as power supply.
Brand | Demarkt |
Manufacturer | Demarkt |
Height | 1 cm (0.39 Inches) |
Length | 1 cm (0.39 Inches) |
Weight | 0.03 kg (0.07 Pounds) |
Width | 1 cm (0.39 Inches) |
Part Number | 341411TPZ203UZ5 |
7. MFMYUANHAN
1PC New Arrival PCA9685 16一Channel 12一bit PWM Servo Motor Driver I2C Module For Arduino Module Board
MFMYUANHAN - Green power一good LED. This board/chip uses i2c 7一bit address between 0x60一0x80, selectable with jumpers. Terminal block for power input or you can use the 01" breakouts on the side.
Reverse polarity protection on the terminal block input. 3 pin connectors in groups of 4 so you can plug in 16 servos at once.
8. Longruner
Longruner 5pcs Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with arduinoIDE Stepper Motor + Driver Board LK67
Longruner - Motor diameter: 1. 1 inches. Wire length:9. 05 inchs. Stepping angle: 5. 625 x 1/64. Reduction ratio: 1/6. Drive module Board Size:1.
26 inchsX1. 38inchs. Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board;. 5pcs stepper motor and driver board compatible with arduinoIDE MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi;.
Cable length: about 20cm /8-inch;. We offer free sample and the tutorial for arduinoIDE beginner to people whom can make projects and review. Stepper motor with a standard interface. A, b, c, d four-phase led indicates the status of the stepper motor work;.
9. Runfon
R3 Motor Driver Module Expansion Board Blue L298p Shield H-bridge 2a for Arduino Uno 2560
Runfon - Controlling the speed and direction of each one independently. R3 driver board lets you drive two DC motors with your board. Max current 2a per channel or 4A max with external power supply. The r3 motor driver module is based on the L298.
Among other features. Which is a dual full-bridge driver designed to drive inductive loads such as relays solenoids DC and stepping motors. Motor drive voltage: external input 3-35V; internal input: 6-12V. You can also measure the motor current absorption of each motor.
Brand | Runfon |
Manufacturer | Runfon |
Height | 2 cm (0.79 Inches) |
Length | 7 cm (2.76 Inches) |
Weight | 0.03 kg (0.06 Pounds) |
Width | 5 cm (1.97 Inches) |
Part Number | nm20210401-038 |