As an Amazon Associate I earn from qualifying purchases.
VOLPORT 6pcs Double Sided Sticker Pads for Swappable Phone Expanding Base, Extra Super Strong VHB Circle Glue Tape for Mobile Car Holder, 3M Sticky Adhesive Pad Replacement for Collapsible Grip Standvolport
- Volport product comes with 12-months warranty, office, nightstand, ceiling, s10 plus, if you have any question, shower room, dash, boat. Please contact us immediately if you have any problems, in this situation, texture surface silicone phone case, please don't not stick adhesion on rugged, please repeat this act: peel-if come up-press red film back-peel again.
6 pieces strong adhesive stickers for grip base: 6 pack bigger circular replacement adhesive is exclusively designed to re-stick phone collapsible grip stand and finger ring phone holder sticky. Last but the most important rule, we are here. We adopt original black gel, stickiness is 40% stronger than others, no problem using in hot Summer when you driving car, truck, vehicle, high temperature and low temperature resistance, jeep, uber etc.
Important note: here are some problem customer may encountered frequently. Hard to peel off the red backing film, wait 24 hours after stuck.
Designed for collapsible grip & car mount: volport new 3m adhesive replacement is designed to reuse expanding phone grips stand and dash magnet car holder; 6pcs larger heat resistant round vhb dots for glue the bases of collapsible mount, 2pcs smaller spare circles discs gel pads mounting tape for the back of self magnetic dashboard car holder and glass. 3. Compatible with phone case iphone 11 pro max, iphone xs max, iphone xs, wall, pixel, cabinet, steering wheel, locker, bed post, s9, cars badge, desk, please contact us. Please clear the mounting surface with universal alcohol prep pad before stick.
|Weight||0.02 kg (0.04 Pounds)|
|Part Number||VOLPORT- VM0027US|
2. Sticky Assets
20 x Number Plate Sticky Pads Strong 3M VHB Double-Sided Fixings by Sticky AssetsSticky Assets
- Maximum bond achieved after 24 hours. Weather resistant Will provide a strong bond in all weather conditions and on all terrain. Heavy duty adhesive Double-sided acrylic foam number plate sticky pads. No damage/no residue clean and easy to apply and leaves no residue or surface damage when removed.
Easy to use simply peel from the provided paper liner and apply pressure to stick on a thoroughly prepared surface. Large surface area20 pads, each 80mm * 20mm x 1mm providing a large adhesive surface area to cover the number plate equally.
|Height||0.1 cm (0.04 Inches)|
|Length||8 cm (3.15 Inches)|
|Weight||0.03 kg (0.07 Pounds)|
|Width||2 cm (0.79 Inches)|
Plastics, Strong Adhesive Foam Pads Mounting Pad for Walls and Floor, Metals, Door, Glasses, TIMESETL 50pcs Double Sided Sticky PadsTIMESETL
- High quality made of black EVA foam, waterproof, double-sided strong adhesive, durable and long service life. Easy to remove with a little heat and caution, these double sided stickers are easy to remove, leave no sign and will not damage paint.
Wide usage these mounting foam tapes are normally applied for case, led, and other lightweight objects, if heavy, use more pads to support.
Size thickness 3. 6mm1. 4-inch, 25pcs square foam tape with rounded off corner, 40 x 40mm1. 57 x 1. 57-inch; 25pcs round foam tape diameter 30mm1. 18-inch. Easy to use backing paper is slightly bigger than sticky pad, metals, easy to peel and paste on clean smooth surface such as wood, glass, plastic.
|Height||2 cm (0.79 Inches)|
|Length||16.5 cm (6.5 Inches)|
|Weight||0.05 kg (0.11 Pounds)|
|Width||12.5 cm (4.92 Inches)|
URATOT 54 Pack Number Plate Sticky Foam Pads Strong Double Sided Foam Pads Number Plate Fixing Self-adhesive Double Sided for Car License Number Plate FixingURATOT
- Easy to use: double sided foam pad can be easily fixed or installed with a license plate; without tightening or screws, just tear off the red foam and paste it on the car license plate; easy to repair or install license plates that are loose, faded or damaged. Notes: before using these number plate sticky foam pads, please simply clean and dry the surface of the object to be pasted, and then paste the pads to make the fixing effect more firm; the pads should be kept in a cool and dry place to avoid the degradation of the stickiness caused by moisture.
Set includes: the set contains 54 pieces of number plate sticky foam pads, easy to tear and will not scatter everywhere, which are sufficient for your daily use; 54 number plate sticky foam pads are stuck on the back paper, convenient for you to use.
Size: the double sided foam pad with a standard plate size of 3. 54 x 079 inch/90 x 20 mm, 0079 inch/2 mm thick, the size is just the right size for a car license plate; without cutting, tear off number plate sticky foam pads and stick them to the car license plate. Wide uses: these number plate sticky foam pads are used to install or fix license plates of cars, trucks, ships, badges, vans, or to fix car plaques, etc. Threshold fittings, caravans, car decals, LCD components and photo frames.
Yojoloin 40Pcs Number Plate Sticky Pads Strong Double Sided Foam Pads for Number Plates Car License Plates Fixing Fitting Kit Photo Frame,Poster,Wifi Pouch Etc40 PACKYojoloin
- Easy to fix or fit those loose, faded or damaged number plate by yourselvesthe. Please simply clean and dry surface then stick. Each double side sticky foam pad is about 3 x 1 x 007 inch.
Come with 40 pack double sided sticky foam pads in the package. Applied for mounting or fixing the number plates of cars, motors, trucks, vans, caravans, boats ect.
6. JD Brands
JD Brands Number Plate Sticky Pads 20 Strong Double Sided Foam Pads for Number Plates Car License Plates Fixing Fitting Kit 20 PACKJD Brands
- Pre cut 20 double sided strong sticky foam pads. Easy to fit and fix number plates of cars, trucks, van, caravans, motors, boats etc ; 85mm x 25mm.
Extra strong adhesive and weather resistant. Multi purpose; car number plates, automotive trim, sill accessories, LCD assemble and even jobs around the house such as photo frames and mirrors.
Extra Super Strong Circle Glue Tape for Mobile Car Holder, Anteel Sticky Adhesive Compatible with Socket Collapsible Grip, 9 Pack Double-Sided Replacement for Swappable Phone Expanding BaseAnteel
- Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. Sticky adhesive replacement superior performanceAnteel double-sided bonding adhesive successfully bonds various surfaces for permanent and repositionable applications.
It resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. High strength allows use of smaller bond areas, quick cure time.
Genuine adhesive padsthe best sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. Ensure that the collapsible grip mount has a clean surface to adhere to so that it sticks properly.
6 pcs alcohol prep padswipe down the adhesion surface with alcohol prep pads when applying adhesive pads. Diameter: 1. 4 inches 35mm is perfectly sized for socket base. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. 9 pcs adhesive pads for collapsible grip baseanteel double-sided bonding pads provide surface adhesion to make selecting the right pads for your collapsible grip.
|Height||0.08 cm (0.03 Inches)|
|Length||3.5 cm (1.38 Inches)|
|Weight||0.01 kg (0.02 Pounds)|
|Width||3.5 cm (1.38 Inches)|
MeetRade Adhesive Suction Cup Mount, Stick On Double Sided Heavy Duty Adhesive Pad Disk For Lock Sucker Suction Cup Hook Mounting on Dashboard For xiaomi xiaoyi gopro camera GPS Sat Nav Cam 70mmMeetRade
- 3. Size and use: diameter 70mm2. 76 inch, remember you finger don’t touch the adhesive pad. 3. Clean the surface you need to install. 4. Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly.
1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
4. Easy to move: when you need to move it, just peel it from the side and slowly pull it up. Even in a car, so can install the camera out side the house.
Clean the surface of the suction cup by alcohol. 2. Peel the adhesive pad and apply to the suction cup carefully, then apply on. 5. Press it at least 30 second. 6. Don’t use it in 12 hours. 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used.