Top 10 Trunk Lift for Model 3 UK – Car Boot Gas Springs

As an Amazon Associate I earn from qualifying purchases.

1. VXDAS

VXDAS 2pcs Upgraded Model 3 Automatic Trunk Lift Supports Rear Trunk Struts with Spring and Stainless Steel Washer Normal

VXDAS - Essential accessories: Great Accessories for your Tesla Model 3. Convenience to place your items in the trunk. Fit all tesla Model 3 Vehicles. The entire operation take less than 10 minutes.

Custom-designed: we redesign the v3. 0 with dust cover, better quality and service life. The automatic trunk Lift has been custom-cut specifically for model 3. Providing the vertical force required to initiate upward trunk movement and a small stainless steel washer that ensure smooth, rattle free movement. Strong and durable: with custom spring and stainless steel washer. Automatic trunk lift: it replaces the existing model 3 OEM trunk lift supports with upgraded supports and springs that will cause the trunk to open fully in an automatic manner. Easy to install: simply use a flathead screwdriver to replace the OEM trunk lift supports.
BrandVXDAS
ManufacturerVXDAS
Part NumberTSL1101

2. ACAMPTAR

ACAMPTAR 4X Front/Rear Trunk Tail Gate Tailgate Boot Gas Spring Shock Lift Struts Support for Tesla Model 3 2017 2018 2019 2020

ACAMPTAR - Strong and durable 3-component integrated kits:air spring for more lifting power, a special spring provides vertical force to initiate upper-body movement, and a small stainless steel washer to ensure smooth, rattle-free motion.

Custom design:the auto luggage lift is designed specifically for the Model 3 and fits for Tesla Model 3 vehicles perfectly. Convenience:if you have replaced the existing tailgate support model 3, just use the FOR Tesla app. High quality:the lift support is strong, durable, sturdy and non-deformable in both heat and cold as it has the highest corrosion resistance achieved by powder coated cylinders and specially treated piston rod surfaces.

Replace your old or damaged parts. Direct replacement, easy installation. Stable characteristics, high reliability. Strict quality control standards to Build and test. The tailgate will then open automatically. Convenient removal and insertion of the items in the trunk.
BrandACAMPTAR
ManufacturerACAMPTAR
Part Number310536
Model310536

3. Jeylly

2X Gas struts Spring for Tesla Model 3, Automatic Trunk Lift Supports Rear Trunk Struts Spring

Jeylly - Smooth and quiet lifting - complete in one step, helps your trunk to open to the maximum angle with just one simple click. Strong and durable: with custom spring and stainless steel washer.

Providing the vertical force required to initiate upward trunk movement and a small stainless steel washer that ensure smooth, rattle free movement. Easy installation - high quality connecting part fit perfectly for your Tesla Model 3. We offer 1 year 100% jeylly warranty, please kindly contact us for exchange, if unfortunately our gas Springs did not work well, refund or return. Highest corrosion resistance achieved through powder coated cyclinders and special treated piston rod surface. Won't cost you more than five minutes to install them! Simply use a flathead screwdriver to replace the OEM trunk lift supports.
BrandJeylly
ManufacturerJeylly
Part NumberCAR-001T

4. BLLBOO

Front Trunk Lift, model 3 gas front trunk-tesla struts-Car Front Trunk Lift Struts Engine Hood Bonnet Support Gas Spring Compatible with Tesla Model 3

BLLBOO - 2. Good performance: all copper hydraulic seals, stable performance, entire journey buffer, excellent sealing, no oil leakage.3. 4. 1. Long service life: after repeated telescopic testing, front trunk lift service life up to tens of thousands of times. 5. Very convenient: Detachable connector, easy to operate, make it convenient for using. Good function: front Trunk Lift adopt classical car paint process, which is antioxidant. Reasonable design´╝Ü According to the original car hole designed, no additional drilling.
BrandBLLBOO
ManufacturerBLLBOO
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Width0 cm (0 Inches)
Part NumberBLLBOOy4ea1g9nhw

5. VXDAS

VXDAS 2pcs Upgraded Model 3 Automatic Trunk Lift Supports Rear Trunk Struts with Spring and Stainless Steel Washer Upgrade

VXDAS - Automatic liftjust use the tesla app or touch the trunk button, the trunk will open fully in an automatic manner. Upgrade accessoriestrunk lift supports are sold as a pair 2 supports per set to replace both the driver and passenger side OEM trunk lift supports.

It fits the car's original size accurately to supports the rear trunk for easy and automatic lifting. Quick installmentthe oem trunk lift bracket can be replaced by a simple operation with a flat-blade screwdriver. Premium materialthe pneumatic strut is made of high quality and premium stainless steel, sturdy and durable. Thick precision steel pipe offers greater lifting power and the spring provides the vertical force to initiate upward trunk movement.

And the entire operation will less than 10 minutes. And stainless steel washer will provides smooth and rattle free movement to ensure much more convenience. It's a great accessories for your Tesla Model 3. Custom designthis rear automatic trunk lift is designed specifically for 2017 2018 2019 Tesla Model 3.
BrandVXDAS
ManufacturerVXDAS
Part NumberVXDAS-ROB

6. DEDC

DEDC 1 Pair Automatic Trunk Lift Pneumatic Complete Struts Kit, Rear Trunk Struts Support with Spring and Stainless Steel Washer for Automatic Lifting 33cm/12.9"

DEDC - Direct replacement for tesla model 3: these auto trunk lift spring is specifically designed for Tesla Model 3. Keep your trunk open vertically: Our Special springs could provide the vertical and powerful force needed to start and support the suitcase moving upward.

Easy installation & perfect fit: quick and easy to install them; Convenient removal; You can replace the existing struts of the OEM Model 3 with the automatical trunk lift support. Upgraded: we adopt upgraded pneumatic strut this time which could provide greater lifting power for your vehicle, more safe and powful. Direct replacement for old and broken ones, money-saving;. Material: made of thickened precision steel pipe, which has high pressure resistance and is not easy to be deformed after many times uses.
BrandDEDC
ManufacturerDEDC
Height10 cm (3.94 Inches)
Length30 cm (11.81 Inches)
Weight450
Width4 cm (1.57 Inches)
Part NumberD015ADHZ

7. Moligh doll

Moligh doll 2 Pair Hydraulic Rods for Tesla Model 3: 1 Pair Automatic Trunk Lift Supports Rear Trunk Struts Spring & 1 Pair Front Lift Hood Supports Automatic Opening Lifting

Moligh doll - Convenience to place your items in the trunk. Automatic trunk lift: it replaces the existing Model 3 trunk lift supports with upgraded supports and springs that will cause the trunk to open fully in an automatic manner. The entire operation take less than 10 minutes. 2 pair hydraulic rods for tesla Model 3: 1 pair Trunk hydraulic support rod and 1 pair Hood hydraulic support rod. Easy to install: simply use a flathead screwdriver to replace the trunk lift supports. Essential accessories: Great Accessories for your Tesla Model 3.
BrandMoligh doll
ManufacturerMoligh doll
Part Number711959
Model711959

8. OutdoorKing

Car Bonnet Gas Springs Front Rear Trunk Tail Gate Tailgate Car Lift Struts Auto Spring Shock Hydraulic Rod Holder For Tesla Model 3 2017 2018 2019 2020 Color : Rear

OutdoorKing - 100% brand new high quality, easy and flexible opening and closing, the lifting bracket is durable, anti-corrosion, convenient and safe. No deformation under high and low temperature conditions, rust-proof, and durable.

Front rear trunk tail gate tailgate car lift struts auto spring Shock Hydraulic Rod Holder For Tesla Model 3 2017 2018 2019 2020 With this specific design damper kit, you can easily open and close your front hood bonnet effortlessly. Before buying, if you have any questions about the product, please confirm whether your car model meets the product requirements, please contact us. On the basis of original equipment design, direct replacement for the old and broken one.
BrandOutdoorKing
Manufacturerle666le
Weight0.78 kg (1.71 Pounds)
Part Numberle-666-le

9. Growment

Growment 2 Pair Hydraulic Rods for Tesla Model 3: 1 Pair Automatic Trunk Lift Supports Rear Trunk Struts Spring & 1 Pair Front Lift Hood Supports Automatic Opening Lifting

Growment - Automatic trunk lift: it replaces the existing Model 3 trunk lift supports with upgraded supports and springs that will cause the trunk to open fully in an automatic manner. 2 pair hydraulic rods for tesla Model 3: 1 pair Trunk hydraulic support rod and 1 pair Hood hydraulic support rod. Easy to install: simply use a flathead screwdriver to replace the trunk lift supports. The entire operation take less than 10 minutes. Essential accessories: Great Accessories for your Tesla Model 3. Convenience to place your items in the trunk.
BrandGrowment
ManufacturerGrowment
Part Number711959
Model711959

10. Vaorwne

Vaorwne 4X Front/Rear Trunk Tail Gate Tailgate Boot Gas Spring Shock Lift Struts Support for Tesla Model 3 2017 2018 2019 2020

Vaorwne - The tailgate will then open automatically. Convenient removal and insertion of the items in the trunk. Custom design:the auto luggage lift is designed specifically for the Model 3 and fits for Tesla Model 3 vehicles perfectly.

Convenience:if you have replaced the existing tailgate support model 3, just use the FOR Tesla app. Replace your old or damaged parts. Direct replacement, easy installation. Stable characteristics, high reliability. Strict quality control standards to Build and test. High quality:the lift support is strong, durable, sturdy and non-deformable in both heat and cold as it has the highest corrosion resistance achieved by powder coated cylinders and specially treated piston rod surfaces.

Strong and durable 3-component integrated kits:air spring for more lifting power, a special spring provides vertical force to initiate upper-body movement, and a small steel washer to ensure smooth, rattle-free motion.
BrandVaorwne
ManufacturerVaorwne
Part Number310536
Model310536